Tuesday, September 29, 2009

Scope Of The Quality Management System

Scope Of The Quality Management System
The ISO 9001 standard requires the quality manual to include the scope of the quality management system including details of justification for any exclusion. The standard addresses activities that may not be relevant or applicable to an organization. The permissible exclusions are explained in section 1.2 of ISO 9001. Here it states that the organization may only exclude requirements that neither affect the organization’s ability, nor its responsibility to provide product that meets customer and applicable regulatory requirements. The requirements for which exclusion is permitted are limited to those in section 7 of the standard.
Under ISO 9001:2008, it was possible for organizations to exclude functions and processes of their organization that may have been difficult to control or were not part of the order fulfilment cycle. Organizations that designed their own products but not for specific customers could escape bringing these operations into the management system. Marketing was omitted because it operated before placement of order. Accounting, Administration, Maintenance, Publicity, Public Relations and After Sales Support functions were often omitted because there were no requirements in the standard that specifically dealt with such activities. As there is no function in an organization that does not directly or indirectly serve the satisfaction of interested parties, it is unlikely that any function or process will now be excluded from the quality management system.
It is sensible to describe the scope of the quality management system so as to ensure effective communication. The scope of the quality management system is one area that generates a lot of misunderstanding particularly when dealing with auditors, consultants and customers. When you claim you have a management system that meets ISO 9001 it could imply that you design, develop, install and service the products you supply, when in fact you may only be a distributor. Why you need to justify specific exclusions is uncertain because it is more practical to justify inclusions.
The scope of the quality management system is the scope of the organization. There is no longer any reason to exclude locations, activities, functions or processes for which there is no requirement in the standard. The reason is because the ISO 9000 family now serves customer satisfaction and is not limited to quality assurance as were the 1994 versions of ISO 9001, ISO 9002 and ISO 9003.
It is not appropriate to address exclusions by inserting pages in the manual corresponding to the sections of the standard and adding justification if not within the scope of the management system – such as ‘We don’t do this!’.
It is much more appropriate to use an appendix as indicated previously in the manual contents list. By describing the nature of the business, you are establishing boundary conditions. If in doing so you do not mention that you design products, it will be interpreted that design is not applicable.
For exclusions relative to detail requirements, the Compliance Matrix may suffice but for an unambiguous solution, it is preferable to produce an exposition that addresses each requirement of the standard.

ISO 9001 Quality Policy

ISO 9001 Quality Policy
The standard requires the quality policy to be appropriate to the purpose of the organization.
The purpose of an organization is quite simply the reason for its existence and as Peter Drucker so eloquently put it there is only one valid definition of business purpose: to create a customer”(Drucker, Peter F., 1977)2 . In ensuring that the quality policy is appropriate to the purpose of the organization, it must be appropriate to the customers the organization desires to create. It is therefore necessary to establish who the customers are, where the customers are, what they buy or wish to receive and what these customers regard as value. As stated above, the quality policy is the corporate policy and such policies exist to channel actions and decisions along a path that will fulfil the organization’s purpose and mission. A goal of the organization may be the attainment of ISO 9001 certification and thus a quality policy of meeting the requirements of ISO 9001 would be consistent with such a goal, but goals are not the same as purpose as indicated in the box to the right. Clearly no organization would have ISO 9001 certification as its purpose because certification is not a reason for existence – an objective maybe but not a purpose.
Policies expressed as short catchy phrases such as “to be the best” really do not channel actions and decisions. They become the focus of ridicule when the organization’s fortunes change. There has to be a clear link from mission to quality policy.
Policies are not expressed as vague statements or emphatic statements using the words may, should or shall, but clear intentions by use of the words ‘we will’
– thus expressing a commitment or by the words ‘we are, we do, we don’t, we have’ expressing shared beliefs. Very short statements tend to become slogans which people chant but rarely understand the impact on what they do. Their virtue is that they rarely become outdated. Long statements confuse people because they contain too much for them to remember. Their virtue is that they not only define what the company stands for but how it will keep its promises.
In the ISO 9001 definition of quality policy it is suggested that the eight quality management principles be used as a basis for establishing the quality policy.
One of these principles is the Customer Focus principle. By including in the quality policy the intention to identify and satisfy the needs and expectations of customers and other interested parties and the associated strategy by which this will be achieved, this requirement would be fulfilled. The inclusion of the strategy is important because the policy should guide action and decision. Omitting the strategy may not ensure uniformity of approach and direction.
The standard requires that the quality policy include a commitment to comply with requirements and continually improve the effectiveness of the quality management system.
A commitment to comply with requirements means that the organization should undertake to meet the requirements of all interested parties. This means meeting the requirements of customer, suppliers, employees, investors, owners and society. Customer requirements are those either specified or implied by customers or determined by the organization and these are dealt with in more detail under clauses 5.2 and 7.2.1. The requirements of employees are those covered by legislation such as access, space, environmental conditions, equal opportunities and maternity leave but also the legislation appropriate to minority groups such as the disabled and any agreements made with unions or other representative bodies. Investors have rights also and these will be addressed in the investment agreements. The requirements of society are those obligations resulting from laws, statutes, regulations etc.
An organization accepts such obligations when it is incorporated as a legal entity, when it accepts orders from customers, when it recruits employees, when it chooses to trade in regulated markets and when it chooses to use or process materials that impact the environment.
The effectiveness of the management system is judged by the extent to which it fulfils its purpose. Therefore improving effectiveness means improving the capability of the management system. Changes to the management system that improve its capability i.e its ability to deliver outputs that satisfy all the interested parties, are a certain types of change and not all management system changes will accomplish this. This requirement therefore requires top management to pursue changes that bring about an improvement in performance.

Wednesday, September 16, 2009

Why Deploy Six Sigma?

Why Deploy Six Sigma in your organization?
Here are some reasons why we should be using Six Sigma to make process improvements:
a) It is a structured approach – if we follow the process, people will not forget any important steps along the way before they implement the solution.
b) It helps quantify the benefits and thus make it easier to sell the improvements to senior managers in the company.
c) It uses facts & data and the rigor of statistical testing to arrive at the right root cause instead of fixing symptoms or putting band-aids.
d) There is a greater likelihood of the solution being sustainable if we follow the Six Sigma process.
e) Six Sigma focuses of solving the right problems using the project selection matrix.
f) It has proven itself in a large number of deployments. Frankly, there is no better tool out there to make process improvements – especially when the root cause or the solution is not known.

Sunday, September 13, 2009

ISO 9000 family of standards and SMEs

ISO 9000 family of standards and SMEs
The ISO 9000 quality management system is generic in nature and applicable to all companies, regardless of the type and size of the business, including small and medium enterprises (SMEs), and they are applicable to all categories of products, whether hardware, software, processed materials or services. ISO 9001:2008 specifies what is required to be done by an organization but does not indicate how it should be done, thus giving the enterprise a lot of flexibility to run its business.
It is simple to use, clear in language and easily understandable. The new standard is also appropriate for small companies, as it does not demand the type of paper bureaucracy needed for the implementation of the 1994 version. Only six documented procedures are now required and need for other procedures/documents can be decided by the company. Companies will, however, be required to provide objective evidence that the QMS has been effectively implemented. A small company may find it appropriate to include the description of its entire QMS within a single Quality Manual, including all the documented procedures required by the standard.
The process-based approach given in the new standard will tend to ensure that systems are documented and implemented in a manner that suits a SME’s own way of doing business. This approach makes it easier for SMEs to implement, instead of just taking over an artificial structure of QMS imposed from outside. It will also be easier for SMEs managed by their owners to demonstrate “top management commitment” towards QMS. Furthermore, in a SME, it is easier to ensure effective internal communication, better utilization of resources, people clearly understanding their roles and responsibilities, etc.
The new standard has included a provision for deciding on the applicability of
certain product realization processes included in section 7 of the standard. For example, if the SME has no responsibility for the design and development of the product it provides, the SME may say so, giving the reasoning behind it, in the Quality Manual; the certification body, being satisfied that this corresponds, would then award it certification to ISO 9001:2008. Similarly, other product realization processes such as purchasing, product identification and traceability, control of measuring devices may also be excluded if these are not applicable for the type of products or services being provided by the company.
It is also possible that SMEs may not have adequate in-house expertise or there may be other constraints to perform all processes on their own. In such cases, the new standard also permits the outsourcing of any of the QMS processes, providing the company has control over such processes. The nature of this control will depend on the nature of the outsourced or subcontracted processes and the risk involved. For example, the design and development process may be subcontracted to an expert or a specialized agency, inspection/verification of goods purchased may be subcontracted to an inspection agency, internal audit of QMS can be outsourced, etc. However, overall responsibility for ensuring control on all outsourced processes as per requirements of the standard would remain with the company’s management.

Management Principles Of ISO 9001 Standards

Management Principles Of ISO 9001 Standards
ISO 9000 is based on eight management principles:
• Customer focus, resulting in meeting customer requirements and striving to exceed them;
• Leadership, aiming to create an internal environment in which people are fully involved;
• Involvement of people who are the essence of an organization;
• Process approach, resulting in improved efficiency to obtain desired results;
• System approach to management, leading to improved effectiveness and efficiency through identification, understanding and management of interrelated processes;
• Continual improvement, which becomes a permanent objective of the organization;
• Factual approach to decision-making, based on the analysis of data and information; and
• Mutually beneficial supplier relationships, based on an understanding of their interdependence.
ISO 9000 encourages the adoption of the process approach to manage an organization. There are five main areas considered for the revised process model in ISO 9000:
• Quality management system
• Management responsibility
• Resource management
• Product realization
• Measurement, analysis and improvement.

Monday, September 7, 2009

What does ISO 9000 offer?

What does ISO 9000 offer?

What does ISO 9000 offer? For one thing, it offers you continuedbusiness with customers who may be requiring you to register. That isa pretty strong benefit right there.These customers may never question your quality, but these customersdepend heavily on their main suppliers. They know they canimprove their quality and through-put, if you improve yours. Just because you are great does not mean you are as great as you couldbe. ISO 9000 mandates a continuous improvement system. Youcan wriggle and fudge, but if you implement that system and workit conscientiously, you cannot help but improve. Continuous improvementis not just a buzz term. It is an imperative. Just because you are great today does not mean you will be great tomorrow.Has your industry changed? Has your organizationchanged? A well-implemented ISO 9000 helps your organizationadapt to change. It brings independence of individuals and consistencyof practices—two features that tend to resist declines inperformance.
What else does ISO 9000 bring you? When well implemented, anISO 9000 quality system improves organization performance. That is,after all, the whole point. In cases where it does not, the fault tendsnot to be in the ISO 9000 process (its inherent deficiencies notwithstanding).When an ISO 9000 system does not provide substantial benefits andimprovement in performance, it is usually because managementhas consciously chosen to cut corners, blowsmoke,stay uninvolved, and starve the system of all but the most essentialresources. “We’ll do this stupid thing, but we’re sure not goingto change the way we operate.”ISO 9000 registration brings you one more thing that your organizationmay not have today: International credibility. ISO 9000 is deployedand practiced in nearly 100 countries around the world. Intoday’s ever-growing international economic climate, this is not a bademblem to have, however narrow the scope of your market today.